Picture Hanging Hacks With Tape. Use a level to line up the frame perfectly. When you’re hanging the picture, make sure the picture wire is tight because you don’t want the frame to hang loose and then fall when the wire snaps.
Lick your middle knuckle and grab the hanger on the back of the picture with the wet finger. Grab a piece of cheap tape (painter's tape or masking tape work fine) and stick the tape between the two holes on a frame. Then they simple take a sharpie and color in or trace the outline of the holes they have on the frame.
Measure out pieces of tape for each dimension. (since the fork guided the wire onto the nail, it'll stay right in place.) then, give yourself a. Make sure the tape is placed at the same spot on each side.
Then You Take Your Tape And Place It.
This simple life hack will make hanging pictures on the wall a breeze! Gathering your materials should involve you getting some masking tape, a sharpie, screws, a drill and a level. After your picture is set into place, remove the fork.
Mark On The Tape Exactly Where The Nails Or Screws Need To Go.
Once the frame is in the right place, press the tape against the wall. Remove the tape and place it on the wall where you want your picture to hang. Tape the outline on the wall.
Use A Pen Or Pencil To Mark Where The Hardware Is On The Tape.
Once they do that, they stick it to the wall. See how easy it is! Be sure to use wall anchors for hanging.
Courtney, Who Goes By @Apieceofmyhaven On Tiktok, Shared The Hack In A Clip That Has Been Viewed Over 709,000 Times.
This simple method of how to hang a picture on the wall takes the guess work out of where to place a nail. (meaning the same distance from the top of the tape.) then i poked a hole through the tape. Now use your tape measure and mark on the wall with your pencil from ceiling to nail holes.